UEV

Our new range of Off-Road Campers has raised the bar in design, build and luxury once again. Following the revealing of our prototype units at the Annual African Caravan | Camp & Destination Show we have commenced production and will bring you more details on this great range of products soon. Note: Images may not be representative of actual production models and price is subject to change.

  • Independent D-Arm with Coil & Double Shock Absorbers.
  • The overall performance of a fully independent suspension is far more superior than that of a solid beam or torsion type suspension. The suspension provides improved articulation over obstacles, increased ride heights, softer ride quality on both tar and corrugated roads and an uncompromised towing experience.
  • 16” Rims or optional alloy upgrade with 245/70/R16 tyres.
  • Adjustable wheel alignment.
  • Auto reverse coupler with run in braking system.
  • Hot dipped galvanised Boxed A-Frame and Chassis.
  • Corner Stabilizer Jacks.

  • The Conqueror UEV Range of Campers are manufactured using a lightweight aluminium frame and Ultra-Light Reinforced Composite Panels.
  • Aluminium frames and components are epoxy coated which provides a durable finish and is more resistant to scratches, chipping, wear and fade.
  • Structural components are designed and manufactured for maximum strength with minimal weight.

  • Side Foldout Double Bed.
  • Interior storage cupboards.
  • Interior dimmable LED lights.
  • Optional low current yet powerful interior fans.
  • Optional Media Centre.
  • Rear access door

KITCHEN:

  • Conveniently laid-out retractable kitchen drawer with dedicated fridge storage.
  • Dedicated Cutlery & Crockery storage.
  • Two plate gas burners.
  • Hot and cold-water wash-up facility.
  • External Pantry.

SHOWER:

  • Externally located, fully enclosed hot and cold water shower cubicle.

PLUMBING:

  • Low centre of gravity 205 litre water tanks.
  • Auto shut-off water pump.
  • Instant Hot water geyser.
  • Integrated plumping for Kitchen and Bathroom.

EXTERNAL STORAGE:

  • Two Jerry Can holders.
  • Dedicated gas bottle storage.
  • Nosecone with dedicated axe and spade mountings.

  • Two deep cycle batteries.
  • 12V Anderson plug for DC charging from vehicle or solar panels.
  • 24A/14.7V (max) intelligent charger integrated into an easy to use power control panel with infographic display.
  • External LED lights.
  • Interior dimmable LED lights.
  • LED Taillights.
  • External Hella Plugs.
  • Front and Rear side markers.
  • Dust Limiting cabin pressure fan.

The UEV Range of campers currently offer a 270 deg Insta Awning which shades the rear and kitchen area and features a uniquely designed frame with integrated dropdown poles that sets up in just a few minutes. Its design does not require any additional support poles and is manufactured using the highest quality materials that will endure the harshest conditions.

Note: Rally tent option available soon.

  • Lightweight.
  • Two Sleeper.
  • Independent D-Arm with Coil & Double Shock Absorbers.
  • Unique design and building techniques.
  • Dust Limiting cabin pressure fan.
  • Ultra-lightweight construction materials.

Exterior Length5346mm
Exterior Width2042mm
Exterior Height2385mm
Track Width1690mm
SuspensionIndependent
TareTBA
GVMTBA
Water Capacity205 Litres
AC Charger Output24A/14.7V (max)
Occupant Capacity4
Side Bed Dimensions1950mm (L) x 1263mm(W)
Front Bed Dimensions1980mm (L) x 1635mm (W)

From R315 296.65

Including VAT @ 15%

Our new range of Off-Road Campers has raised the bar in design, build and luxury once again. Following the revealing of our prototype units at the Annual African Caravan | Camp & Destination Show we have commenced production and will bring you more details on this great range of products soon. Note: Images may not be representative of actual production models and price is subject to change.

  • Independent D-Arm with Coil & Double Shock Absorbers.
  • The overall performance of a fully independent suspension is far more superior than that of a solid beam or torsion type suspension. The suspension provides improved articulation over obstacles, increased ride heights, softer ride quality on both tar and corrugated roads and an uncompromised towing experience.
  • 16” Rims or optional alloy upgrade with 245/70/R16 tyres.
  • Adjustable wheel alignment.
  • Auto reverse coupler with run in braking system.
  • Hot dipped galvanised Boxed A-Frame and Chassis.
  • Corner Stabilizer Jacks.

  • The Conqueror UEV Range of Campers are manufactured using a lightweight aluminium frame and Ultra-Light Reinforced Composite Panels.
  • Aluminium frames and components are epoxy coated which provides a durable finish and is more resistant to scratches, chipping, wear and fade.
  • Structural components are designed and manufactured for maximum strength with minimal weight.

  • Front Foldout Double Bed.
  • Side Foldout Double Bed.
  • Side foldout bed configurable as a dinette area.
  • Interior storage cupboards.
  • Interior dimmable LED lights.
  • Optional low current yet powerful interior fans.
  • Optional Media Centre.
  • Conveniently located interior washbasin.
  • Two side access doors.

KITCHEN:

  • Conveniently laid-out retractable kitchen drawer with dedicated fridge storage.
  • Dedicated Cutlery & Crockery storage.
  • Two plate gas burners.
  • Hot and cold-water wash-up facility.
  • External Pantry.

SHOWER:

  • Externally located, fully enclosed hot and cold water shower cubicle accessible from inside or outside.

PLUMBING:

  • Low centre of gravity 205 litre water tanks.
  • Auto shut-off water pump.
  • Instant Hot water geyser.
  • Integrated plumping for Kitchen and Bathroom.

EXTERNAL STORAGE:

  • Two Jerry Can holders.
  • Rear storage rack.
  • Dedicated gas bottle storage.
  • Nosecone with dedicated axe and spade mountings.

  • Two deep cycle batteries.
  • 12V Anderson plug for DC charging from vehicle or solar panels.
  • 24A/14.7V (max) intelligent charger integrated into an easy to use power control panel with infographic display.
  • External LED lights.
  • Interior dimmable LED lights.
  • LED Taillights.
  • External Hella Plugs.
  • Front and Rear side markers.
  • Dust Limiting cabin pressure fan.

The UEV Range of campers currently offer a 270 deg Insta Awning which shades the rear and kitchen area and features a uniquely designed frame with integrated dropdown poles that sets up in just a few minutes. Its design does not require any additional support poles and is manufactured using the highest quality materials that will endure the harshest conditions.

Note: Rally tent option available soon.

  • Independent D-Arm with Coil & Double Shock Absorbers.
  • Unique design and building techniques.
  • Dust Limiting cabin pressure fan.
  • Ultra-lightweight construction materials.

Exterior Length4850mm
Exterior Width2042mm
Exterior Height2385mm
Track Width1690mm
SuspensionIndependent
TareTBA
GVMTBA
Water Capacity205 Litres
AC Charger Output24A/14.7V (max)
Occupant Capacity4
Front Bed Dimensions1980mm (L) x 1635mm (W)
Side Bed Dimensions1890mm (L) x 1263mm(W)

From R445 499.65

Including VAT @ 15%

Off-Road caravanning just got a lot better. Focusing on luxury and comfort whilst retaining Conqueror’s rugged look and uncompromising performance the UEV-25 sets the standard.

The trend setting UEV-25 features an all new suspension, and body construction which comprises of durable composite materials borrowed from the aeronautical industry that provides excellent insolation and weight benefits. The industry first and patented side bed design allows for the UEV-25 to be set up in just a few minutes.

  • Independent D-Arm with Coil & Double Shock Absorbers (8 shocks & 4 D-Arms).
  • The overall performance of a fully independent suspension is far more superior than that of a solid beam or torsion type suspension. The suspension provides improved articulation over obstacles, increased ride heights, softer ride quality on both tar and corrugated roads and an uncompromised towing experience.
  • 16” Rims or optional alloy upgrade with 285/75/R16 tyres.
  • Adjustable wheel alignment.
  • Auto reverse coupler with run in braking system.
  • Hot dipped galvanised Boxed A-Frame and Chassis.
  • Corner Stabilizer Jacks.

  • The Conqueror UEV Range of Campers are manufactured using a lightweight aluminium frame and Ultra-Light Reinforced Composite Panels.
  • Aluminium frames and components are epoxy coated which provides a durable finish and is more resistant to scratches, chipping, wear and fade.
  • Structural components are designed and manufactured for maximum strength with minimal weight.

  • Front Island Double Bed.
    Side Foldout Double Bed.
  • Side foldout bed configurable as a dinette area.
  • Interior storage cupboards.
    Internal Bathroom. (Shower & Toilet)
  • Upright 12V Fridge/Freezer (internal).
  • Dimmable Interior LED lights.
  • Optional low current yet powerful interior fans.
  • Optional Media Centre.

KITCHEN:

  • Conveniently laid-out retractable kitchen drawer.
  • Dedicated Cutlery & Crockery storage.
  • Two plate gas burners.
  • Hot and cold-water wash-up facility.
  • External Pantry accessible from inside.
  • Fridge/Freezer storage in nosecone.

PLUMBING:

  • Low centre of gravity 290 litre water tanks.
  • Auto shut-off water pump.
  • Instant Hot water geyser.
  • Integrated plumping for Kitchen and Bathroom.

EXTERNAL STORAGE:

  • Two Jerry Can holders.
  • Rear storage rack.
    Dedicated gas bottle storage.
  • Nosecone with dedicated axe and spade mountings.

  • Two deep cycle batteries.
  • 12V Anderson plug for DC charging from vehicle or solar panels.
  • 24A/14.7V (max) intelligent charger integrated into an easy to use power control panel with infographic display.
  • External LED lights.
  • Interior dimmable LED lights.
  • LED Taillights.
    External Hella Plugs.
  • Dust Limiting cabin pressure fan.

The UEV Range of campers currently offer a 270 deg Insta Awning which shades the rear and kitchen area and features a uniquely designed frame with integrated dropdown poles that sets up in just a few minutes. Its design does not require any additional support poles and is manufactured using the highest quality materials that will endure the harshest conditions.

  • Independent D-Arm with Coil & Double Shock Absorbers.
    Double Axle.
  • Unique design and building techniques.
  • Dust Limiting cabin pressure fan.
  • Ultra-lightweight construction materials.
  • Large upright interior Fridge/Freezer.
  • Front Island Double Bed.

Exterior Length7290mm
Exterior Width2042mm
Exterior Height2380mm
Track Width1740mm
SuspensionIndependent Coil Suspension (D-Arm)
Tare1870kg
GVM2200kg
Water Capacity290 Litres
AC Charger Output24A/14.7V (max)
Occupant Capacity4
Front Bed Dimensions1950mm (L) x 1370mm (W)
Side Bed Dimensions1931mm (L) x 1290mm(W)

From R587 318.80

Including VAT @ 15%